However you want to make your mark, RMI Laser has just the right solution. Our lineup of Laser Marking Systems provides you with great options for taking on the full range of marking and engraving methods. We can help you do quality engraving, etching, ablation, annealing, color changing, foaming and polishing.
A process where material is actually removed or vaporized, then recast to create depth in the material. The measured depth for engraving is greater than one thousandth of an inch.
A process where material is actually removed or vaporized, then recast to create depth in the material. The measured depth for etching is less than one thousandth of an inch.
The process of removing coatings like anodization, black oxide, plating, masking, or insulation via irradiation from a laser beam.
The process by which the surface of a material is heated to just below its melting point in order to create oxide layers on the surface.
This mark type uses the energy of the laser beam to alter the molecular structure of the piece, making a visible change in the color of the plastic substrate without damaging the surface of the material.
This mark uses the energy of the laser beam to alter the molecular structure of the piece, making a visible change in the color of the substrate, without damaging the surface of the material. Foaming is similar to color changing, however the process actually raises the level of the material so it appears like a foam on the surface of the plastic.
Polishing is a process where the laser’s intensity is reduced to ensure the lightest marking intensity possible. This creates a mirror-like oxidized surface layer without removing any actual surface material.
106 Laser Drive, Building #2
Lafayette, CO 80026
+1.866.952.7370
+1.303.664.9000
info@rmilaser.net
Copyright © 2024 RMI Laser, All Rights Reserved